Zindn shield cold spray zinc
01 ------ Introduction of zinc shield cold spray zindn
Zindn Shield high-performance cold-spray zinc coatings, cold-spray zinc products made of pure thin graphene, a new generation of heavy-duty anti-corrosion industrial paints. Deeply combining the high rust resistance of cold-sprayed zinc technology with the excellent electrical, chemical, and mechanical properties of graphene is an effective solution to the current anti-corrosion problems of steel structures.
02 ------ Excellent performance of graphene materials
03 ------ Zindn shield high-performance cold spraying zinc zindn protection mechanism
04 ------Performance characteristics of zinc shield high-performance cold-sprayed zinc
1. Salt spray resistance:
The cold spray olefin zinc salt spray is far superior to the zinc-rich primers and graphene zinc powder primers containing more than 70% zinc on the market, and the salt spray resistance time is more than 2 times the existing zinc powder primer standard.
2. Excellent anti-cracking performance
The excellent mechanical strength of graphene is evenly dispersed into "graphene islands", which suppresses the propagation of cracks and extends the crack path.
Test method: Thick coating on angle steel to simulate steel structure, 50 cycles of cooling and heating between -20 and 60°C, cracking of primer without graphene (220-240 microns); primer of graphene (280-370 microns) ) No cracking.
3. Inhibit the spread of corrosion: The zinc salt deposits in the rusted area inhibit the spread of corrosion.
After 1000 hours of salt spray test, the corrosion of the traditional zinc-rich primer scratches spread.
In the salt spray test for 3000 hours, the rust of the cold sprayed zinc zinc primer did not spread.
4. Excellent adhesion: Graphene makes the coating have better adhesion.
5. Excellent impact resistance: The layer structure of graphene overlapping each other improves the impact resistance of the coating, impact resistance>55/cm.
6. Better economy: cold sprayed zinc zinc has high volume solid content, low density, and low paint consumption.
7. Better construction matching: the thick film does not crack or fall off, and the matching is better.
05 ------ Comparison of salt spray resistance of zindn shield high performance cold spray zinc
1000h鹽霧試驗對比圖 | |||
鋅盾含純薄石墨烯產(chǎn)品 | 60%富鋅含石墨烯鋅 | 30%富鋅含石墨烯鋅 | 60%富鋅不含石墨烯 |
Zindn Shield Super Anti-rust Paint
Revolutionary curing attachment principle ---- super performance can be used for aircraft carrier repair
With rust coating, super hardness, high temperature resistance, acid and alkali resistance
No matter whether it is rusted or not, it can easily solve the problem of rust through a simple one-time process and control rust and corrosion for a long time.
The anti-rust ability far exceeds the anti-rust anti-rust paint and rust conversion coating, completely solve the problem of repair with rust.
01 ------ Technical characteristics
1. Most of the painted surfaces do not need to be treated
2. Painting in high humidity environment
3. Fire resistance and high temperature resistance
4. High hardness and wear resistance
5. Corrosion resistance, excellent rust removal effect
02 ------ Application field
Bridges and flyovers, petrochemicals, thermal power generation, railway transportation, ship and automobile manufacturing, sea crude oil, drilling towers, power transmission towers, water conservancy hubs, machinery manufacturing, etc.
03 ------ Construction parameters
Coating process construction parameters: | |||
Construction methods | Manual brushing and roller coating | Air spray | High pressure airless spray |
Thinner dosage (volume ratio %) | 0-10 | 0-20 | 0-5 |
Spray pressure Mpa | - | 0.2-0.4 | 0.4-0.7 |
Nozzle aperture | - | 1.5-2.5 | 0.38 -0.53 |
Viscosity(P) | - | 10-25 | 15 - 35 |
Note: The above viscosity is Ford cup nr4 (23℃). In addition, the super anti-rust paint is also suitable for dip coating and special pressure spray can construction methods. The above dilution ratio is for reference only. |
04 ------ Technical parameter
Test items | Technical index | Detection method |
Paint film appearance | Silver grey liquid | Visual inspection |
Proportion | 0.95 -1 g/ml | GB/T 6750-2007 |
Solid volume | 50%(±3) | GB/T 9272-2007 |
Adhesion | Level 1 (100 grid test) | GB/T 9286-89 |
Pencil hardness | ≥5H | GB/T 6739-2006 |
Impact resistance | ≥ 50cm ≥Recoil 30cm | GB/T 1732-1993 |
Flexibility | 2mm | GB/T 6742-2007 |
Abrasion resistance | (CS17 wheel, 1kg, 1000r) mg wear 38mg | GB/T1768-2006 |
Salt spray resistance test | Surface treatment metal model(≥2000小時) | GB/T 1771-2007 |
Heat resistance | 150 degrees temperature resistance 168 hours | GB/T1735-2009 |
Fire prevention | A grade fireproof coating | Verified by ASTM |
Resistance to artificial aging | UV 2000 hours pass | GB/T 1865-2009 |
Chemical resistant | Acid and alkali resistance 168 hours Seawater resistance 1000 hours | GB/T 9274-1988 |
Anti-fungal test | Tested for 28 days without mold | GJB 150.10A-2009 |
Constructability of paint | Brush/roller/spraying/dry film thickness 25-65 m (wet film 50-130 m)μ | GB/T 6822 |